PTFE teflon rod, teflon sheet and teflon tube
PTFE material resists attack by heat and virtually all chemicals. It is insoluble in all organics with the exception of a few exotic strong base chemicals. Its electrical properties are excellent. Although it has high impact strength, its resistance to wear, tensile strength and creep resistance are low in comparison to other engineering type thermoplastics. Mechanical properties can be improved by adding fillers such as glass fibers, bronze, Delrin, carbon, and graphite.
PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE(teflon) rod and molded PTFE(teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE rod has similar friction levels to ice. The material of PTFE can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.
Main Products Available:
1). PTFE Sheet (Skived sheet and mold compression board)
2). PTFE Rod ( Extruded rod and mold compression rod )
3). PTFE Pipe/Hose (full specification)
4). PTFE etched sheet, PTFE with filler(carbon, glassfiber, bronze...etc. )
5). PTFE machined parts
| Types |
Diameter(mm) |
Length(mm) |
| pressed rod |
2~4 |
produced under requirements |
| extruded rod |
5~120 |
500~3000 |
| die pressed rod |
25~300 |
100~300 |
Main Technical Data:
| Properties |
unit |
Result |
| Apparent density |
g/cm 3 |
2.10~2.30 |
| Tensile strength(min) |
MPa |
14.0 |
| Crack elongation(min) |
% |
140 |
Audited Supplier 
){kind=link}