Kel-F PCTFE Rod Used for LNG Application

• Customization: Available
• Material: PCTFE
• Kind: Plastic Bar
• Model NO.: PCTFE
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Tensile Strength: 38-48 MPa
• Density: 2.1-2.18
• Elongation at Break: 40-100 %
• Shore D: Durometer 85
• Application: Cryogenic Application and Handling of Gases.
• Transport Package: Export Carton
• Specification: Diameter 3.0mm to 50 mm
• Trademark: hongda
• Origin: China
• Production Capacity: Big & Stable

Product Description

Product Description

                                                                                   PCTFE ROD

PCTFE, Polychlorotrifluoroethylene is a melt-processable chlorofluoropolymer. The presence of a chlorine atom, which has a greater atomic radius than that of fluorine, gives rise to irregularities in the polymer chain and reduces polymer crystallinity. This results in PCTFE having a relatively low melting point among fluoropolymers. It is also the polymer with the lowest water vapor and moisture absorption rate. It resists ignition because its Limiting Oxygen Index (LOI), which is greater than 95.

PCTFE rod resists attack by most chemicals, a property that is exhibited due to the presence of its high fluorine content. It is oxidation resistant because it does not have any hydrogen atoms.

The main field of application of PCTFE is cryogenics due to the fact that it is the fluoropolymer that best retains its mechanical properties at extremely low temperatures and is therefore the least fragile of the fluoropolymers.

PCTFE is incompatible with alkaline metals and in some cases with organic amines. Its use is not recommended at temperatures above 150°C.

PCTFE rod is recommended for cryogenic application and handling of gases. PCTFE rod has better mechanical properties than other fluoropolymers and low permeability.

Key Properties:

• Especially suitable for cryogenic applications
• Excellent resistance to creep
• Dimensionally stable over a wide temperature range
• Extremely low gas permeability
• FDA approval
• Transparent and coloured compounds
• Working temperature from -240°C to +180˚C

Detailed Photos

Product Parameters

Porperty	Norm	Value
Density (g/cm3)	ISO1183	2.1-2.18
Tensile strength at break %	ISO527	38-48
Modulus of elasticity (Gpa)	ISO527	1.45-1.6
Elongation at Break (%)	ISO527	40-100
Shore D	Durometer	85
Temperature range ºC		-200-120
Coefficient of linear thermal expansion	ISO11359	0.6

Company Profile

ongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts. The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...