PVDF Tanks for Acid and Corrosive Chemical Processing in Elevated Temperature Environments

• Customization: Available
• Material: PVDF
• Water Absorption: ＜0.01%
• Tensile Strength: 41~50MPa
• Density: 1.76-1.78g/cm3
• Elongation at Break: 300-450%
• Temperature Range: -40 to 150 Celcius Degree
• Transport Package: Plywood Case
• Specification: Diameter 50-300mm, Length200mm
• Trademark: Hongda
• Origin: Hunan China
• HS Code: 3904690000
• Production Capacity: 100 Tons/Month

Product Description

             PVDF tanks for acid and corrosive chemical processing in elevated temperature environments
PVDF tanks for acid and corrosive chemical processing in elevated temperature environments
PVDF (PolyVinylidene Fluoride) is a specialty plastic material in the fluoropolymer family. Its tensile strength is two times higher than PTFE, the compressive strength six times higher than PTFE, and the abrasion resistance similar to nylon. PVDF can be injected, molded to sheet, rod, pipe and is widely applied in the fields of photovoltaic, semiconductor, aviation and aerospace, electric plating, chemical anti-corrosion lining, tube, pump, valve, gasket, impeller and electrical wire& cable protection.

Features:
Appearance: Smooth surface, uniform texture, white color
1. High mechanical strength & rigidity
2. Good toughness
3. Good sliding and abrasion resistance
4. Self-extinguishing
5. UV resistant
6. Corrosion resistant
7. Good aging resistant and electrical insulation

Typical application:
1. Photovoltaic
2. Semiconductor
3. Electrical plating, photovoltaic
4. Chemical corrosion resistant lining
5. Chemical storage and handling, such as tube, pump
6. Electrical wire and wire protection
Technical index:

Item	Unit	Test method/condition	Index
Density	g/cm3	ASTM D792	1.76-7.18
Tensile strength	MPa	ASTM D638/23Celcius degree	39-59
Elongation at break	%	ASTM D638/23 Celcius degree	300-450
Hardness	shore	Durometer	D75-85
Coefficient of linear expansion	1/Celcius degree	ASTM D699/23-60 Celcius degree	4.2×10 -5

Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...