Filled PTFE with Glassfiber, Carbon and Graphite

• Customization: Available
• Material: PTFE
• Kind: Thermosetting Plastics Pipe
• Model NO.: HDPTFE 001
• Tensile Strength: 15MPa
• Density: 2.10-2.2g/cm3
• Elongation at Break: 150%
• Temperature Range: -196-260
• Dielectricity Strength: 10kv/mm
• Transport Package: Export Carton
• Specification: pc
• Trademark: highdom
• Origin: Zhuzhou, China
• HS Code: 3902900090
• Production Capacity: Big&Stable

Product Description

                                                                25% Carbon filled PTFE

 PTFE with filler

Based on different application, it can be added some filler for PTFE,which not only keeps the original properties, but also enhanced the rigidity, aniti-abrasion , anti-deformation,thermal conductivity, commonly used fillers are: glass fiber, graphite,carbon fiber,molybdenum disulfide, cooper, powder,ekonl,peek ect


product specification
 

Filled materials	Common filled ratio ( Quantity %)	Main performances
Bronze	20,40	Increases hardness and wear resistance; Improve dimensional stability and compressive strength; Not suitable for corrosive or electrical applications
Graphite	5, 10, 15	Improves the deformation under load; Reduces initial wear; Improves thermal and eletrical conductivity
Glass Fiber	5,10, 15, 25	Increases compressive strength, rigidity and wear. Reduces creep and cold flow; Improve Dimension Stability.
Carbon Fiber	5,10 , 15, 25	Increases compressive strength, hardness, wear, and load properties. Reduces creep and cold flow
POB (polyphenyl ester)	5, 10, 15	Improve the lubrication performance; Enhance the mechanical strength;   Increase using temperature
BaSO4	5, 10, 15	Increases compressive strength, hardness and wear resistance Reduces creep
SiO2	5, 10, 15	Increases hardness and wear resistance; Improve Dimensional Stability.
Glass beads	5, 10, 15	Reduces creep and cold flow; Lower density Increases hardness and wear resistance;
Others materials	PEEK(polyetheretherketone), MoS2 ,etc.