PTFE Extruded and Moulded Pipe/Tube

• Customization: Available
• Material: PTFE
• Density: 2.14-2.2 g/cm3
• Temperature Range: -196~260 Centigrade
• Shore D: 52
• Transport Package: Export Carton, Pallet
• Specification: full specification
• Trademark: hdgfz
• Origin: China
• HS Code: 3902100090
• Production Capacity: Big&Stable

Product Description

Product name
PTFE Extruded and Moulded pipe/tube
 

The superior dielectric properties especially at high radar and microwave frequencies makes PTFE widely use as an insulation material. PTFE is also works in a wide temperature from -180°C to +260°C.

PTFE is capable of much higher temperatures than many other materials.It is classed as a high performance substitute over weaker and lower melting point polyethylene.

 

Main properties 

. Excellent corrosion resistance
. Good electrical insulation performance
. High temperaturer resistance
. low coefficient of friction
. Good non-sticky properties

Application

PTFE is widely used in chemical anti-corrosion, mechanical seal,engineering piping, electrical insulation,pump&valve
fluid,aviation,textile,ceramic and other industries


Technical specification

Property	NORM	VALUE
Density	ISO1183	2.14-2.2
Tensile strength at break ( Mpa)	ISO527	18-30
Modulus of elasticity (Gpa)	ISO527	0.35-0.5
Elongation at break	ISO527	150-350
Shore D	DUROMETER	52
Temperature range	/	-196-260
Coefficient of linear thermal expansion	ISO11359	1

Products available:
 

PTFE Extruded Tube (mm)
OD*ID	KG/M	OD*ID	KG/M
0.9*0.5	0.001	9.0*6.0	0.082
1.2*0.8	0.0015	10.0*8.0	0.066
1.4*1.0	0.0017	10.0*7.0	0.093
2.0*1.6	0.003	12.0*10.0	0.08
2.8*2.2	0.006	13.0*11.0	0.087
3.0*1.0	0.015	14.0*12.0	0.095
3.0*2.0	0.009	15.0*13.0	0.102
3.5*2.5	0.011	16.0*14.0	0.109
4.0*3.0	0.013	17.0*15.0	0.117
4.5*3.5	0.015	18.0*16.0	0.124
5.0*3.0	0.030	19.0*16.0	0.191
5.0*4.0	0.017	20.0*17.0	0.202
6.0*3.0	0.050	21.0*18.0	0.213
6.0*4.0	0.037	22.0*19.0	0.224
6.0*5.0	0.020	25.0*22.2	0.257
7.0*5.0	0.044	32.0*29.0	0.335
7.0*6.0	0.024	40.0*36.0	0.554
7.8*7.0	0.022	50.0*46.0	0.700
8.0*6.0	0.051	........
8.0*5.0	0.071	460.0*448.0	19.85
9.0*7.0	0.058	510.0*497.0	23.841

 

PTFE Moulded Tube (mm)
OD	Length	Note
20-900	≤300	Special sizes can be customized

Company introduction:

Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.
The productssell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry
semiconductor, gas&oil, pump&valve, water treatment...


Factory key equipment: