Extrusion PVDF Sheet 1500*3000

• Material: PVDF
• Kind: High-Performance Plastic
• Tensile Strength: 39-59MPa
• Density: 1.76-1.78g/cm3
• Elongation at Break: 20-50%
• Shore D: 80
• Temperature Range: -30~150
• Transport Package: Pallet, Plywood Case
• Trademark: Hongda
• Origin: China, Hunan
• Production Capacity: 100 Tons/Month

Product Description

                         Plastic Sheet 1000*2000  1220*2440  1500*3000 Extrusion PVDF sheet 

PVDF (PolyVinylidene Fluoride) is a specialty plastic material in the fluoropolymer family. Its tensile strength is two times higher than PTFE, the compressive strength six times higher than PTFE, and the abrasion resistance similar to nylon. PVDF can be injected, molded to sheet, rod, pipe and is widely applied in the fields of photovoltaic, semiconductor, aviation and aerospace, electric plating, chemical anti-corrosion lining, tube, pump, valve, gasket, impeller and electrical wire& cable protection.

 

Features:
Appearance: smooth surface, uniform texture, white color
1.High mechanical strength & rigidity
2.Good toughness
3.Good sliding and abrasion resistance
4.Self-extinguishing
5.UV resistant
6.Corrosion resistant
7.Good aging resistant and electrical insulation

 

Typical application:
1. Chemical Tank and Equipment Construction
2. Semiconductor Industry
3. Power and Electrical Engineering
4. Solar photovoltaic
5. Valves&Pumpes
6. Laboratory Engineering
7. Food Industry
8. Environmental technology
9. High purity water

Technical index and specification (mm):

Item	Unit	Test method/condition	Index
Density	g/cm 3	ASTM D792	1.76-7.18
Tensile strength	MPa	ASTM D638/23 Celcius degree	39-59
Elongation at break	%	ASTM D638/23 Celcius degree	300-450
Hardness	shore	Durometer	D75-85
Coefficient of linear expansion	1/celcius degree	ASTM D699/23-60 Celcius degree	4.2×10 -5

Products available

Item	Thickness	Width	Length
Molded sheet	6-50	1000×2000 1220×2440 1500×3000
Extruded sheet	1-15	1000-1500	≤10000
Lining sheet(with backing polyester &glass fiber)	2-6	1000-1200	≤10000

Company introduction
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...

Key equipment