Engineering Piping PTFE Rods, High Performance Plastic PTFE, Modified PTFE

• Customization: Available
• Material: PTFE
• Kind: High-Performance Plastic
• Model NO.: PTFE
• Water Absorption: ＜0.01%
• Tensile Strength: 18-30 MPa
• Density: 2.14-2.2 g/cm3
• Tensile Strength at Break(MPa): 18-30
• Modulu of Elasticity(Gpa): 0.35-0.5
• Elongation at Break(%): 150-350
• Shore D: 50-65
• Temperature Range: -196-260 Celsius
• Coefficient of Linear Themal Expansion: 1.0
• Transport Package: Export Carton, Pallet
• Specification: full specification
• Trademark: hdgfz
• Origin: China
• HS Code: 3902100090
• Production Capacity: Big&Stable

Product Description

PTFE material resists attack by heat and virtually all chemicals. It is insoluble in all organics with the exception of a few exotic strong base chemicals. Its electrical properties are excellent. Although it has high impact strength, its resistance to wear, tensile strength and creep resistance are low in comparison to other engineering type thermoplastics. Mechanical properties can be improved by adding fillers such as glass fibers, bronze, Delrin, carbon, and graphite.

PTFE rod, sheet and tube exhibits the lowest electric constant and lowest dissipation factors of all solid materials. Because of its strong chemical linkage, PTFE tube, rod and sheet shows very little attraction for dissimilar molecules. This results in a coefficient of friction as low as 0.05. Once again, because of this chemical bonding, PTFE plastic resins are virtually insoluble

Main Properties:
Inertness to most chemicals
Resistance to high temperatures
Zero moisture absorption
Low coefficient of friction
Excellent dielectric properties
Chemically resistant
Excellent radiation resistance
Relatively insensitive to power frequency

Technical Specification:

Property	Norm	Value
Density	ISO1183	2.14-2.2
Tensile strength at break(Mpa)	ISO527	18-30
Modulus of elasticity(Gpa)	ISO527	0.35-0.5
Elongation at break(%)	ISO527	150-350
Shore D	Durometer	50-65
Temperature range	/	-196-260 centidegree
Coefficient of linear thermal expansion	ISO11359	1.0

Main Products Available:
1). PTFE Sheet (Skived sheet and mold compression board)
2). PTFE Rod ( Extruded rod and mold compression rod )
3). PTFE Pipe/Hose (full specification)
4). PTFE Extruded Tube(full specification)
5). PTFE etched sheet, PTFE with filler(carbon, glassfiber, bronze, graphite...Etc. )
6). PTFE machined parts
Note: Special sizes can be customized for customers specified requirements.

Product:


Certification: