100% Virgin PTFE Bar, Teflon Bar

• Material: PTFE
• Transport Package: Export Carton, Pallet
• Specification: full specification
• Trademark: hdgfz
• Origin: China
• Model NO.: HDPTFE008
• HS Code: 3902100090
• Production Capacity: Big&Stable

Product Description

Product name

100% virgin PTFE bar, teflon bar

PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE(teflon) rod and molded PTFE(teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE rod has similar friction levels to ice. The material of PTFE can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.


Main properties 

. excellent corrosion resistance
. Good electrical insulation performance
. High temperaturer resistance
. low coefficient of friction
. Good non-sticky properties

Application

PTFE is widely used in chemical anti-corrosion, mechanical seal,engineering piping, electrical insulation,pump&valve
fluid,aviation,textile,ceramic and other industries.
Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on.

Technical specification

Property	NORM	VALUE
Density	ISO1183	2.14-2.2
Tensile strength at break ( Mpa)	ISO527	18-30
Modulus of elasticity	ISO527	0.35-0.5
Elongation at break	ISO527	150-350
Shore D	DUROMETER	52
Temperature range	/	-196-260
Coefficient of linear thermal expansion	ISO11359	1

Products available:

Diameter           ( unit: mm)	Thickness (unit: mm)	Type
3~200	1000~3000	extruded rod
10~350	≤300	moulded rod
0.8/1.0/1.8/2	not fixed	solid wire

 
Other products
PTFE rod, sheet and tube exhibits the lowest electric constant and lowest dissipation factors of all solid materials. Because of its strong chemical linkage, PTFE tube, rod and sheet shows very little attraction for dissimilar molecules. This results in a coefficient of friction as low as 0.05. Once again, because of this chemical bonding, PTFE plastic resins are virtually insoluble

Main Products Available:
1). PTFE Sheet (Skived sheet and mold compression board)
2). PTFE Rod ( Extruded rod and mold compression rod )
3). PTFE Pipe/Hose (full specification)
4). PTFE etched sheet, PTFE with filler(carbon, glassfiber, bronze, graphite...Etc. )
5). PTFE machined parts

Company introduction:

Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.
The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry
semiconductor, gas&oil, pump&valve, water treatment...