| Material: | PTFE |
|---|---|
| Kind: | Plastic Bar |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | 2.0%~5.0% |
| Tensile Strength: | (18-30)MPa |
| Temperature Range: | -196~260 |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier PTFE material resists attack by heat and virtually all chemicals. It is insoluble in all organics with the exception of a few exotic strong base chemicals. Its electrical properties are excellent. Although it has high impact strength, its resistance to wear, tensile strength and creep resistance are low in comparison to other engineering type thermoplastics. Mechanical properties can be improved by adding fillers such as glass fibers, bronze, Delrin, carbon, and graphite.
• Excellent corrosion resistance
• Good electrical insulation performance
• High temperature resistance
• Low coefficient of friction
• Good non-sticky properties
PTFE semi-finished rod,tube and sheet is widely used in chemical anti-corrosion,mechanical seal,engineering piping,electrical insulation,pump&valve fluid,aviation,textile,ceramic and other industries.
1). PTFE Sheet (Skived sheet and mold compression board)
2). PTFE Rod ( Extruded rod and mold compression rod )
3). PTFE Pipe/Hose (full specification)
4). PTFE etched sheet, PTFE with filler(carbon, glassfiber, bronze...Etc. )
5). PTFE machined parts
| Property | Norm | Value |
| Density(g/cm³) | ISO1183 | 1.8~2.5 |
| Tensile Strength at Break(Mpa) | ISO527 | 18~30 |
| Modulus of Elasticity(Gpa) | ISO527 | 0.35~0.5 |
| Elongation at break(%) | ISO527 | 150~350 |
| Hardness Shore(Shore D) | Durometer | 50~65 |
| Temperature Range(°C) | / | -196~260 |
| Coefficient of Linear Thermal Expansion(10-4/°C) | ISO11359 | 1.0 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}