Brone Reinforced PTFE Carbon PTFE or Filled PTFE

• Material: PTFE
• Kind: Plastic Bar
• Density: 2.1-2.3G/Cm3
• Elongation at Break: 150%
• Temperature Range: -196 to 260 Celcius Degree
• Transport Package: Carton/ Pallet
• Model NO.: HDPTFE007
• Specification: Standard size and custom made are available
• Trademark: Hongda
• Origin: Hunan China
• HS Code: 3904610000
• Production Capacity: 300 Tons/Month

Product Description

Product name

 Brone reinforced PTFE carbon PTFE or filled PTFE


Main properties 

. excellent corrosion resistance
. Good electrical insulation performance
. High temperaturer resistance
. low coefficient of friction
. Good non-sticky properties


Products available:
 

Filled materials	Common filled ratio ( Quantity %)	Main performances
Bronze	20,40	Increases hardness and wear resistance; Improve dimensional stability and compressive strength; Not suitable for corrosive or electrical applications
Graphite	5, 10, 15	Improves the deformation under load; Reduces initial wear; Improves thermal and eletrical conductivity
Glass Fiber	5,10, 15, 25	Increases compressive strength, rigidity and wear. Reduces creep and cold flow; Improve Dimension Stability.
Carbon Fiber	5,10 , 15, 25	Increases compressive strength, hardness, wear, and load properties. Reduces creep and cold flow
POB (polyphenyl ester)	5, 10, 15	Improve the lubrication performance; Enhance the mechanical strength; Increase using temperature
BaSO4	5, 10, 15	Increases compressive strength, hardness and wear resistance Reduces creep
SiO2	5, 10, 15	Increases hardness and wear resistance; Improve Dimensional Stability.
Glass beads	5, 10, 15	Reduces creep and cold flow; Lower density Increases hardness and wear resistance;
Others materials	PEEK(polyetheretherketone), MoS2 ,etc.

Application

PTFE is widely used in chemical anti-corrosion, mechanical seal,engineering piping, electrical insulation,pump&valve
fluid,aviation,textile,ceramic and other industries.


1. Containers and pipework for reactive and corrosive chemicals
2. Electrical insulation parts
3. Sealing gasket, lining, valve seats, O-ring, slide bearing

Company introduction:

Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.
The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry
semiconductor, gas&oil, pump&valve, water treatment...


Factory Key Equipment