Expanded with One Side Telflon PTFE Etched Sheet for Bonding

• Customization: Available
• Material: PTFE
• Kind: Engineering Plastic Sheet
• Model NO.: PTFE Etched Sheet
• Contraction Percentage: ＜0.4%
• Tensile Strength: 18-30 MPa
• Density: 1.8-2.5 g/cm3
• Elongation at Break: 150-350 %
• Temperature Range: -196-200 Degree C
• Shore D: Durometer 50-65
• Transport Package: Export Carton
• Specification: full size and special size can be customized
• Trademark: hongda
• Origin: China
• Production Capacity: 200tons/Month

Product Description

                                 Etched PTFE sheet

PTFE is an amazing non-stick material, but what about when you need to glue it to the suface of another material ?

In order to bond standard PTFE to another surface such as stainless steel, a process called "etching" is required. Typical applications would include the lining of chemical process tanks or other equipment used in caustic environments. When bonding is needed, sodium etching is usually the most economical answer. This process uses of a mixture of sodium that is formulated to create a bondable surface both quickly and efficiently.
Sodium etching service complies with all applicable commercial, federal specifications for the surface treatment of all fluoropolymers including: PTFE, PFA, FEP, ETFE, PCTFE, PVDF
From microchips to full size rolls, fluoropolymers of any shape or complexity, including tape, sheet, tubing, molded shapes & machined parts of any configuration can be etched & bonded. This treatment can be accomplished on one or more surfaces, or selectively within close tolerances.

• Etched surfaces will discolor to a brown appearance.
• It can be Etched on One Side (EOS)(Standard) or Two Sides (E2S)

Features of Etched PTFE Sheets:

• Able to be bonded after treatment.
• Uniform treatment on One Side or Two Sides (Surface treatment only).
• Thin Gauge Etched PTFE is Sold By The Pound ($/LB) (1 LB = .454 kgs) OR By The Square Foot ($/SF)
• Minimum Order May ApplyBenefits of Etched PTFE Sheets:
• Able to be bonded after treatment.
• Uniform treatment on One Side or Two Sides (Surface treatment only).
• Minimum Order May Apply

Property	Norm	Value
Density(g/cm³)	ISO1183	1.8~2.5
Tensile Strength at Break(Mpa)	ISO527	18~30
Modulus of Elasticity(Gpa)	ISO527	0.35~0.5
Elongation at break(%)	ISO527	150~350
Hardness Shore(Shore D)	Durometer	50~65
Temperature Range(°C)	/	-196~260
Coefficient of Linear Thermal Expansion(10-4/°C)	ISO11359	1.0

Typical Applications:
1. Containers and pipework for reactive and corrosive chemicals
2. Electrical insulation parts
3. Sealing gasket, lining, valve seats, O-ring, slide bearing