Used in Chemical Tank Fluoropolymer PVDF Plastics

• Formula: PVDF
• Material: PVDF
• Usage: Fluoroplastic
• Plastic Properties After Heated: PVDF
• Plastic Forming Method: Extrusion
• Color: White
• Model NO.: PVDF
• Density (g/cm3): 1.78
• Tensile Strength at Break(MPa): 42-55
• Modulus of Elasticity(Gpa): 1.9-2.2
• Elongation at Break(%): 20-50
• Shore D: 80
• Temperature Range: -30-150
• Coefficient of Linear Thermal Expansion: 0.42
• Transport Package: Export Carton, Pallet
• Specification: PVDF
• Trademark: HIDOM
• Origin: China
• HS Code: 3902900090
• Production Capacity: Big&Stable

Product Description

Product introduction:

PVDF (PolyVinylidene Fluoride) is a specialty plastic material in the fluoropolymer family. Its tensile strength is two times higher than PTFE, the compressive strength six times higher than PTFE, and the abrasion resistance similar to nylon. PVDF can be injected, molded to sheet, rod, pipe and is widely applied in the fields of photovoltaic, semiconductor, aviation and aerospace, electric plating, chemical anti-corrosion lining, tube, pump, valve, gasket, impeller and electrical wire& cable protection.

Features:
Appearance: Smooth surface, uniform texture, white color
1. High mechanical strength & rigidity
2. Good toughness
3. Good sliding and abrasion resistance
4. Self-extinguishing
5. UV resistant
6. Corrosion resistant
7. Good aging resistant and electrical insulation


Typical application:
1. Photovoltaic
2. Semiconductor
3. Electrical plating, photovoltaic
4. Chemical corrosion resistant lining
5. Chemical storage and handling, such as tube, pump
6. Electrical wire and wire protection

Technical index:

Item	Unit	Test method/condition	Index
Density	g/cm3	ASTM D792	1.76-7.18
Tensile strength	MPa	ASTM D638/23Celcius degree	39-59
Elongation at break	%	ASTM D638/23 Celcius degree	300-450
Hardness	shore	Durometer	D75-85
Coefficient of linear expansion	1/Celcius degree	ASTM D699/23-60 Celcius degree	4.2×10 -5

PVDF main products available:

1). PVDF Sheet (1000mm*2000mm, 1500mm*3000mm, special size can be customized)
2). PVDF sheet with fabric (Polyester or glass fiber)
3). PVDF Welding rods: (Dia. 3mm, Dia. 4mm and Dia. 5mm)
4). PVDF rod: (Dia. Φ 10mm~ Dia. Φ 250mm)
5). PVDF pipe (Φ 4mm~Φ 200mm)
6). PVDF pipe fittings (Elbow, Tee, reducer, flange, unionetc. )
7). PVDF machined parts.

Certification:

Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...

Part of equipment: