| Material: | PTFE |
|---|---|
| Kind: | Hard Plastic Rods |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | 2.0%~5.0% |
| Tensile Strength: | (18-30)MPa |
| Temperature Range: | -196~260 |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier PTFE material resists attack by heat and virtually all chemicals. It is insoluble in all organics with the exception of a few exotic strong base chemicals. Its electrical properties are excellent. Although it has high impact strength, its resistance to wear, tensile strength and creep resistance are low in comparison to other engineering type thermoplastics. Mechanical properties can be improved by adding fillers such as glass fibers, bronze, Delrin, carbon, and graphite.
• Excellent corrosion resistance
• Good electrical insulation performance
• High temperature resistance
• Low coefficient of friction
• Good non-sticky properties
PTFE semi-finished rod,tube and sheet is widely used in chemical anti-corrosion,mechanical seal,engineering piping,electrical insulation,pump&valve fluid,aviation,textile,ceramic and other industries.
PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE(teflon) rod and molded PTFE(teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE rod has similar friction levels to ice. The material of PTFE can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.
Main Products Available:
1). PTFE Sheet (Skived sheet and mold compression board)
2). PTFE Rod ( Extruded rod and mold compression rod )
3). PTFE Pipe/Hose (full specification)
4). PTFE etched sheet, PTFE with filler(carbon, glassfiber, bronze...Etc. )
5). PTFE machined parts
Technical Data:
| Property | Norm | Value |
| Density(g/cm³) | ISO1183 | 1.8~2.5 |
| Tensile Strength at Break(Mpa) | ISO527 | 18~30 |
| Modulus of Elasticity(Gpa) | ISO527 | 0.35~0.5 |
| Elongation at break(%) | ISO527 | 150~350 |
| Hardness Shore(Shore D) | Durometer | 50~65 |
| Temperature Range(°C) | / | -196~260 |
| Coefficient of Linear Thermal Expansion(10-4/°C) | ISO11359 | 1.0 |
Finished PTFE Products
Whether you require a PTFE seal profile or complex 5-axis CNC bespoke components, we have the capability to manufacture PTFE parts and components to your requirements. Our highly trained workforce, combined with investment in the latest CNC machining technologies, helps ensure consistent high quality.
Machined PTFE parts to your specification -we manufacture according to drawing, from O-ring to piston ring, from seal to bearing, from bush to back-up ring and thousands of complex, bespoke components required by our customers. We also offer help with design optimisation for manufacture.
Below are some examples of machined parts by PTFE rod or tube.
Production ability:
Application:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}